S V Hi-Tech Bearing (India) Private Limited

By keeping track of the newest market development, we are betrothed in offering our patrons exceptional quality array of Thrust Needle Roller Bearings that is specifically designed in tune with set industry norms. Our offered bearings are composed of washer, rollers & thrust cage. At our vendors end, this roller bearing is developed using quality-approved raw material and ultra-modern machinery. Apart from this, offered roller bearing is accessible in variety of stipulations as per the detailed requirements of our patrons.

The tapered bearing is one of the most commonly used forms of roller bearings in the industry. Consisting of two main components - the inner assembly, and the outer-cage, the two components are typically mounted in opposing pairs on a shaft. Air supply is sent through the shaft with a cross-hole or inlet from the outer-cage. Tapered Roller Air Bearing has standard sizes available up to a 75 mm ID outer-cage spin or inner-race spin with options.

Miniature deep groove ball bearings with an extended inner ring are designed to offer enhanced performance in specific applications. These bearings feature an inner ring that is wider than the outer ring, typically by 0.397mm (1/64 inch) on both sides, providing increased stability and load capacity. They are part of the deep groove ball bearing family, which are self-retaining units and are among the most versatile and robust rolling bearings available. These bearings are commonly used in a wide range of light-duty instrument and precision applications, such as handheld tools and instruments.

Combined bearings are designed to handle both radial and axial loads simultaneously, making them suitable for applications where traditional bearings might not suffice. These bearings combine a radial component, such as a needle roller bearing, with an axial component, such as an angular contact ball bearing or a deep groove ball bearing, to provide robust support under heavy loads.

A cross cylindrical roller slewing bearing is a type of bearing that can carry axial load, tilting moment, and radial load simultaneously. It is composed of an inner ring, outer ring, a single row of rollers, a cage (spacer), and a sealing device. The design and application of the cross cylindrical roller slewing bearing are similar to those of the four-point contact ball slewing bearing, except that the rolling elements are replaced from balls to rollers, and the contact method between the rolling elements and the rings changes from point contact to line contact. This change increases the load-carrying capacity but also increases wear and friction moment loads.